bonding strength sentence in Hindi
Sentences
Mobile
- In consequence the bonding strength rises with increasing annealing temperatures.
- This can result in bonding strengths around 70 MPa.
- Ions with lone pairs have a greater ability to adapt their bonding strength to match that of the counter-ion.
- Therefore, the intermolecular bonding strength falls further down, a result of which is the low melting point of high fluorides.
- Both effects reduce the overall bonding strength in the unit cell and therefore the enthalpy of formation and melting point.
- This results in the atom having a smaller coordination number, hence a higher bonding strength, when the lone pair is stereoactive.
- There is a water-based contact cement that is less toxic and non-flammable, but it has less bonding strength than the petroleum-based cement.
- Instead, they bond to the B 12 icosahedra in the neighboring layer, and this decreases bonding strength in the " c "-plane.
- Utilizing similar donor-acceptor frameworks, the authors demonstrated that halogen bonding strength in the liquid crystalline state is comparable to the hydrogen-bonded mesogens.
- They are characterised by high bonding strength, dimensional stability and creep resistance at elevated temperatures, and frequently combined with co-curing resins such as epoxies.
- After the pre-bonding in air, in a special gaseous atmosphere or vacuum, the wafers have to pass an annealing process for increasing the bonding strength.
- The bonding strength is mainly dependent on the density, the spreading area of the glass frit layer and the surface layer of the bonding interface.
- The lone pairs become stereoactive when the bonding strength of the counter-ion exceeds twice the bonding strength of the ion when its lone pairs are inactive.
- The lone pairs become stereoactive when the bonding strength of the counter-ion exceeds twice the bonding strength of the ion when its lone pairs are inactive.
- In addition this procedure is conducting at low processing temperatures, low resultant stress induced in final assembly, high bonding strength, large fabrication yield and a good reliability.
- But also if the soft-curing is above 210 �C the adhesive cures too much, so that the material is not soft and sticky enough to achieve a high bonding strength.
- In modern practice, the advent of liquid acrylic additives and other advances to the grout mixture, create slower moisture absorption over the older formulas, and also increase bonding strength to mitigate these failures.
- In consequence a significant fraction of Si-OH ( silanol ) groups start to polymerize at room temperature forming Si-O-Si and water and a sufficient bonding strength for handling the wafer stack is assured.
- Atoms with non-bonding valence electrons, i . e ., with lone pairs, have more flexibility in their bonding strength than those without lone pairs depending on whether the lone pairs are stereoactive or not.
- On the basis of his research data Fajans formulated the essential conclusions concerning chemical bonding strength and deformation of ions and particles, such as heat of ion hydration, refraction measurements and the heat of sublimation.
- More Sentences: 1 2
bonding strength sentences in Hindi. What are the example sentences for bonding strength? bonding strength English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.